Quick Recipes and Easy

The Importance of Proper Sanitization in the Homebrewing Process

Bottling their first batch of homebrew is a huge step in the lives of novice homebrewing enthusiasts. While the beer still will not be ready to drink for several weeks after bottling, there is certainly a strong sense of satisfaction that can be gained from finally moving the brew from the fermentation container into the bottles. While this step is often a fantastic deal of fun, it is vital to keep some basics in mind when priming and bottling to make the most successful final product possible.

The first step in bottling your homebrew is, obviously, to obtain the bottles. Many homebrew supply shops will sell bottles that you can use in homebrewing, and you can also obtain them from bars and restaurants. Bottle caps can be picked up from homebrewing supply shops.

Perhaps the most hard part of bottling for the homebrewing novice is discerning when to bottle. The bubbling that serves as a visible indicator of fermentation typically stops after only a few days, but fermentation is not complete at that point. It is vital to wait some time after the visible signs of fermentation have disappeared to ensure that the process has run its course. A couple of terrible things can occur if the beer is bottled before fermentation has completed. The quality of the beer will certainly suffer, since many of the unpleasant tasting precursor compounds will not have been metabolized by the yeast and will remain in the final product. Another, much more spectacular, problem that can occur is that the fermentation process may continue in the bottle which causes excess amounts of carbon dioxide to build up until the bottle finally explodes. Many homebrewing veterans have at least one “exploding bottle” tale from their early days of homebrewing. The amount of time required for fermentation to complete varies according to recipe, strain of yeast used, temperature, as well as other factors. It is therefore vital to carefully follow fermenting instructions if you are using a recipe, or question other homebrew hobbyists for advice.

Once you are certain that fermentation has completed, it is time to start the bottling process. Since the beer will be left in the bottle to age and prime, it is vital that all bottles and caps be thoroughly sanitized prior to use. Be sure to thoroughly rinse with boiled water if you use a bleach based sanitizing agent.

Once the bottles and caps are ready, it is time to brewingkb.com/bottling/beer-keg-bottle-203.html prime and bottle the beer. Priming is an vital step since it adds a small amount of sugar which allows a limited amount of fermentation to occur in the bottle, thereby carbonizing the beer. The best way to prime the beer is to boil sugar and water together in a sanitized container and transfer them to the sanitized bottling bucket. After the primer sugar is in place, you can then siphon the beer from the fermenting container into the bottling bucket. If you do not have a bottling bucket, you can also add the primer directly to the fermenter prior to bottling.

Once the beer has been primed, it is time for that huge final step – bottling. It is vital to fill the bottles slowly to avoid any aeration, which can ruin the flavor of the final product by adding too much oxygen to the beer. After the bottle has been filled, it is time to add the sanitized cap and then repeat until all bottles have been filled.

Of course, the real hard part comes next, which is waiting for the beer to age and prime. This can take up to a month or more, depending on the type of yeast used. But, if you simply must have a taste before then, the beer should be serviceable within one week, but you should wait at least a month before consuming more than a few bottles.

Bottling and priming is the final step of the homebrewing process and fantastic care should be taken to ensure that you don’t ruin your hard work by allowing unwelcome microorganisms to contaminate the brew. Be sure to sanitize every piece of tubing, every bottle, and every bucket that comes into contact with the beer. If all goes well, you will be enjoying your creation in a few weeks.

Discuss brewingkb.com brewing with other homebrewers at BrewingKB.com.



About the Author

has written 10297 stories on this site.

Write a Comment

Gravatars are small images that can show your personality. You can get your gravatar for free today!

Copyright © 2017 Quick Recipes and Easy, Gourmet Food Recipes, Gourmet Food Blog. All rights reserved. Crawler and visitors tracking tool for webmaster-SEO script - Outil de suivi des visiteurs et des robots pour webmaster Google bot last visit powered by PrMania.Net
Powered by WordPress.org, Custom Theme and Free web submit and Health Clubs Fitness
Doctor consultation canada pharmacy %{^& buy viagra professional contact us or toll free.